Written price before work
Agreed before any repair work begins.
Faucet Installation and Repair in Conyers
Faucet installation and repair in Conyers is usually a small job with a precise cause: a worn cartridge, a scaled seat, a failed supply line, or a shut-off that will not close. SoCo Plumbers diagnoses the fixture during business hours, Monday to Friday, 9 AM to 5 PM, repairs where the body is sound, and replaces where it is cracked or corroded through — with a written price agreed before work.
- Dripping faucets
- Cartridges
- New fixtures
- Written price firstPrice agreed before work starts
- Parts on the truckCommon fittings and fixtures stocked
- Old parts shown to youYou see what we replaced
- Work area wiped downFloors and cabinets left clean
What Faucet Installation and Repair Includes
Every faucet installation and repair visit follows the same core scope: diagnose first, agree the price and scope in writing, do the work, and test before leaving.
- Full faucet inspectionThe faucet, its supply lines, shut-offs and drain connection are checked, since a drip can come from any of them.
- Repair or replacementCartridges, seals and seats are repaired where the body is sound; a cracked or corroded body is replaced, and the choice is explained before work.
- New supply linesSupply lines and shut-offs are renewed where they are aged or seized, so the new or repaired faucet does not depend on a failing valve.
- Leak test and pressure checkThe fixture is tested under full pressure, hot and cold, before sign-off.
- Cleanup and haul-awayThe old fixture and parts are hauled away and the sink area is wiped down.
Faucet Service for Homes
For Conyers homes: dripping kitchen and bath faucets, stiff handles, low flow at one tap, and new fixture installs, handled during business hours.
- Dripping faucets
- Stiff or loose handles
- Low flow at one tap
- New fixture installs
Faucet Installation and Repair for Businesses
Offices, restaurants, shops and multi-family buildings with faucet faults get the same diagnose-first approach during business hours, with repeat faults across units noted for the property record.
- RestaurantsRestaurant faucet drips and stiff handles are handled during business hours, scheduled around service where possible, with shutoffs checked before the fixture is touched.
- OfficesOffice and breakroom faucet faults are looked at during the working week, with the visit booked in advance and the supply shutoff tested first.
- RetailRetail faucet and supply-line failures are repaired during business hours, with disruption kept to the affected area and the fixture tested before we leave.
- Multi-familyUnit-to-unit faucet leaks and low-flow complaints in multi-family buildings are diagnosed during business hours, with findings shared in writing.
Faucet Installation and Repair in Conyers, Georgia
A faucet drip is a small symptom with a specific cause, and finding it matters: a cartridge, a seat, a seal, a supply line or a shut-off can each drip identically at the spout. Repair makes sense when the body and finish are sound; replacement makes sense when the body is cracked, corroded through, or its parts are no longer available. Our plumbing repairs work covers the wider fixture picture, and our sink and garbage disposal services cover the kitchen end of the same sink; faucet work is the fixture itself, diagnosed before it is swapped.
Conyers water conditions wear faucet internals faster than in softer-water areas, with mineral content building on cartridges and seats and causing drips and low flow. Older homes often carry original brass fixtures and older shut-off valves that need rebuilding or replacement, while newer builds carry builder-grade fixtures that tend to fail at supply lines first. Shut-off valves are checked on every faucet visit, since a faucet repaired onto a seized valve is a job half done. Winter freezes are also checked for, since a cracked supply line announces itself at the first cold snap.
Diagnose the drip, repair the sound body, replace the failed one.
What Happens When You Call
From the first call to the final test, here is the sequence for a faucet installation and repair visit in Conyers, booked during business hours.
Phone Call
Call +17708971640 Monday to Friday, 9 AM to 5 PM. Tell us which faucet drips, sticks, or runs low and where; we will talk through shutting off the under-sink valves if that is the safe first step.
Visit and Arrival
We schedule a visit during business hours and confirm the window. On arrival we check the faucet, its shutoffs, and its supply lines first, before any dismantling.
Diagnosis
We identify the faucet type, test cartridge, seat, seals, supply lines and shut-offs, and decide repair versus replacement on the body's condition.
Repair or Replacement
The cartridge or seal is replaced, or the new fixture is fitted with fresh supply lines and working shut-offs, then tested hot and cold at full pressure.
Test and Walkthrough
Before we leave, the faucet is run hot and cold, checked for drips at every joint, and we walk you through what failed and what to watch next.
Tools and Methods We Use
Pipe wrench
Used to loosen and tighten supply lines and shutoff valves under the sink without damaging the fittings.
Basin wrench
Reaches the mounting nuts behind a sink where a standard wrench will not fit, making faucet removal and installation faster.
Pipe cutter
Cuts copper pipe cleanly when we need to replace a corroded section feeding the faucet.
Press tool
Connects PEX tubing and copper pipe without soldering, which is faster and safer in tight cabinets.
Leak detection equipment
Finds hidden moisture behind walls or under cabinets when a faucet leak has spread beyond the sink.
Teflon tape and pipe thread sealant
Seals threaded connections on supply lines and shutoff valves to prevent drips.
2024 International Plumbing Code with Georgia Amendments (UPC)
We follow UPC standards for fixture installation, supply line sizing, and shutoff valve placement. That keeps the work code-correct and inspection-ready.
EPA WaterSense
When you want to cut water use, we install WaterSense-labeled faucets that use at least 20 percent less water without losing pressure.
When Faucet Service Is the Right Call
A faucet drips when it is off
A drip with the handle closed usually means a worn cartridge, seat or seal. We identify the part, repair it where the body is sound, and test under pressure.
Flow is low at one tap only
Low flow at a single tap points to an aerator, a cartridge or a supply line for that fixture, not to the house system. Each is checked in order.
A handle is stiff, loose or will not shut fully
Handles fail at cartridges, stems and mounting. The fixture is assessed whole, since a handle fault and a drip often share a cause.
A new faucet is being fitted
A new fixture is fitted with fresh supply lines and working shut-offs, and the drain connection is checked, so the install does not inherit an old valve's fault.
How Faucet Service Works in Conyers
Faucet work in Conyers follows water chemistry and fixture era. Mineral content wears cartridges and seats, causing drips and low flow, and it builds on aerators until a tap that once ran freely barely flows. Older homes often have original brass fixtures and older shut-off valves that need rebuilding; newer builds have builder-grade fixtures that fail at supply lines first. Every faucet visit therefore checks the shut-offs and supply lines alongside the fixture itself, and a cracked supply line from a winter freeze is looked for before it becomes a flood.
- Olde Town ConyersMany homes here have original brass faucets and older shut-off valves that need rebuilding or replacement alongside the fixture.
- FieldstoneLarger homes with multiple bathrooms often need several faucets serviced in one visit, with cartridges matched per fixture.
- Honey CreekNewer construction with builder-grade fixtures that often fail at the supply lines first; supply lines and shut-offs are checked on every visit.
- Lake CapriNear the lake, sediment in the supply can clog aerators and wear cartridges faster. Aerators and supply lines are checked together.
- Rockdale Water Resources supplyMost of the area is served by Rockdale Water Resources from Big Haynes Creek, with the 2025 consumer confidence report showing no violations. A sudden bill jump still warrants a meter and fixture check.
- Ageing pipe erasConyers (median year built 1993) and Rockdale County (1990) mix galvanized, copper, cast iron and PEX. Each material fails differently, so diagnosis starts with what is actually in the walls and ground.
From problem to finished result
A kitchen faucet that dripped all night
BeforeA steady drip with the handle closed kept the sink wet and the household awake.
AfterThe cartridge and seat were identified as the cause, replaced, and the faucet tested hot and cold at full pressure with no drip.
A drip with the handle closed is a cartridge, seat or seal fault. Note whether it drips hot, cold or both before the visit.
Low flow at a single bathroom tap
BeforeOne tap ran weakly while every other fixture in the house ran normally.
AfterThe aerator and cartridge were checked in order, the blocked aerator and worn cartridge were dealt with, and flow recovered to match the other taps.
Low flow at one tap only is a fixture fault, not a house fault. Check the aerator first — it is the simplest cause.
A new faucet on seized shut-offs
BeforeA planned new faucet sat above shut-offs that would not close.
AfterThe shut-offs and supply lines were renewed with the fixture, so the new faucet does not depend on valves that cannot close.
A new fixture on seized valves is half a job. Ask whether the shut-offs were checked, not just the faucet.
Problems Faucet Service Covers
Most faucet calls fall into a handful of categories. Here are the ones we see most often in Conyers and how each is handled.
Drips with the handle closed
Cartridge, seat and seal are tested in order. The failed part is replaced where the body is sound.
Low flow at one tap
Aerator, cartridge and supply line are checked in order, so a house-pressure problem is not mistaken for a fixture fault.
Stiff, loose or spinning handles
Cartridge, stem and mounting are assessed together, since handle and drip faults often share a cause.
Failed supply lines and shut-offs
Aged or seized supply lines and valves are renewed with the fixture, so the repair does not depend on a failing valve.
Done properly, tested before we leave
Written price before work
You agree the price and the scope before work starts. Oct-2026 Atlanta market data on this page is background only, never a quote for your job — call for a written price before work.
Work to the adopted code
Faucet work is built to the 2024 International Plumbing Code with Georgia Amendments, effective 1 January 2026. Permits are checked with the City of Conyers or Rockdale County as applicable, where a replacement changes supply or drain routing.
Repair where the body is sound
A sound faucet body gets a cartridge or seal, not a new fixture. Replacement is recommended only where the body has actually failed.
Tested, not assumed
New and repaired faucets are run through hot and cold, checked for drips at every joint, and shown to you before we pack up, with old parts left for you to see.
What you receive
Clear records you can keep and share.
Parts list
Every fitting and fixture noted on the invoice.
Pressure test
Line tested and confirmed before we leave.
What to know before the visit
Three observations make a faucet visit faster. Here is what to note before calling.
Hot, cold or both
A drip on hot only, cold only or both narrows the cartridge and supply at fault.
One tap or the whole house
One weak tap is a fixture fault; every tap weak is a system fault. Note which you have.
Whether the shut-offs turn
Try the shut-offs under the sink gently. If they will not move, say so — they may need renewing with the fixture.
Covering Conyers and nearby Rockdale County
Call to confirm coverage in your part of Conyers and Rockdale County. +17708971640
What Conyers Customers Say
4.7 stars from 7 Google reviews · Read reviews on Google
Monday to Friday, 9 AM to 5 PM; Saturday and Sunday closed. If a burst pipe or sewer backup happens outside those hours, shut off the water, stop running water, and call +17708971640 at 9 AM. If you smell gas, leave the building first and call 911 or your gas utility — do not wait for a plumber.
No firm price is possible before the fixture type and fault are known. As background only, Oct-2026 Atlanta market data, not SoCo Plumbers' prices — call for a written price before work.: Angi's Atlanta average for a plumber visit was $316 (range $174–$460) in July 2026. A written price is agreed after diagnosis.
If the body and finish are sound, a cartridge or seal repair is usually the sensible fix. If the body is cracked, corroded through or parts are unavailable, replacement is discussed and priced before work.
A straightforward like-for-like swap is a common homeowner job, and our guide to installing a faucet covers the steps. If shut-offs are seized, supply lines are aged, or the drain connection needs work, book a visit during business hours.
Call for Faucet Installation and Repair in Conyers
A dripping faucet, a stiff handle, low flow at one tap, or a new fixture to fit — call SoCo Plumbers at +17708971640 during business hours. Diagnosed first, priced in writing.
Call SoCo Plumbers
Call SoCo Plumbers Monday to Friday, 9 AM to 5 PM for faucet service. Tell us whether the drip is hot, cold or both, and whether the shut-offs under the sink turn.
- Phone+17708971640
- HoursMonday–Friday 9 AM–5 PM · Saturday and Sunday closed
- Address5179 W Shore Dr, Conyers, GA 30094